Warm butterfly

Hi everyone,

This is one of a series of cards I made in june. I didn’t have time yet to post it, but here I am. I needed some inspiration for an order back then and went back to pinterest to get some. After half an hour of surfing I got enough of it and ended up by CASEing one of DeAnn Rauzi’s card. This is my shot at it:

IMG_8380

Hope you like it!

Special order : coral necklace

Hi peeps,

Time for me to show off some jewelery. You may have noticed that I started posting my jewelery creations again. My friends have been asking to put my latest creations online, so they could keep up. I have a lot of orders lately (not complaining at all !), and it takes me so much time that I can’t write my posts anymore. But here I am with the third one :

IMG_8387

I made this necklace as a complement to the coral bracelet (see this previous post). One of my clients ordered the coral bracelet, a pair of earrings and a matching necklace for his wife’s birthday. So I made this three row necklace. I used several sizes of red seed beads, coral beads and silver plated beads and findings. The picture is not very good, but I had no time to make nice pictures as I was already late on schedule to deliver the package to my client (I luckily got just in time for her birthday), but I hope you get the idea !

Have a nice day !

Greetz

 

Chevrolet Impala birthday card

Hi everyone,

Today I share with you an older card I made during winter. I had an order for a masculine card. The challenge was that I had to include the fact that the person would receive a Chevrolet Impala for his birthday. I used the “in stiches” wheel onto green SU! cardstock to imitate a car wheel print.

IMG_7643

I got the Impala sketches online, printed one on white cardstock and colored it in with copic markers.IMG_7644As you can see on the above picture, I used a Z-fold for this card. The sentiment says “happy birthday” and is Stampin’up.

Hope you like it!

Pink wire wrapped bracelet : case study

Hi everyone,

I am back with some of my jewelry creations !

I encountered this kind of bracelets several times on Etsy and google images and thought I could give it a shot too. I had some difficulties to figure it out in the beginning, but I think I finally made it:)! This is a pink stone version of the wire wrapped bracelet. You can find the different versions in my etsy store…IMG_8394 IMG_8393Hope you liked it…

See ya !

Birthday Special Sale

Today is my BIRTHDAY and I treat you all with a 1 DAY ONLY coupon CODE for Crealotte Design Boutique on Etsy!!!!

Use this code BIRTHDAY1DAYSPECIAL to receive 15% off for any minimum 25€ (34$) order.

Have a nice day…

Chunky style necklace and matching earrings : Case study

IMG_8402I found this nice necklace on pinterest and wanted to make something of it. Although the temptation was big to completely copy the design, I thougth it was better to make a different version while keeping some details. So I kept the big chunky bead in the middle and the part with the multiple rows. I however made a longer version of the necklace as I thought this would better fit with my design and completely changed the set of beads used.

IMG_8404The beads are : yellow agate, labradorite chips, tiger eye beads and miracle beads. They are intercalated by different colors of seed beads. Can you image that the necklace (and its earrings) were sold one week later ?

IMG_8409

Greetz…

Keyboard card: Tutorial and a handy little tip…

Dear followers,

How are you guys? I have been busy lately, with a lot of orders, but I have found some time to share with you this slightly different card: A keyboard card. I made this card for a special occasion where the celebrated one will receive a very special keyboard, a mechanical one. I don’t see the advantage of having a mechanical keyboard, but I must be outdated… On top of being mechanical, this one also has no writing at all on any of the buttons! Ya, I don’t see the point, but again, if someone can be happy with it, why not. But now about my card. I made a card stock black keyboard with no writing on it.

IMG_8433This card could fit for any guy who likes computers, for father day or a birthday… As I had to search a bit before finding the right dimensions, I thought I would share the dimensions (and how to) with you. You will need:

black card stock:
One 10 1/2 x 10, scored at 5
One 9 7/8 x 10, scored at 5
Sixty 1/2 x 1/2 (all small buttons)
Two 1/2 x 1 (left second row)
One 1/2 x 3 1/2 (space bar)
Two 1/2 x 3/4 (extremities third row from the bottom)
Two 1/2 x 1/4 (Extremities upper row)
Two 1/2 x 1 1/4 (big buttons numeric board)

White card stock:
one 4 3/4 x 9 3/4
one 4 5/8 x 9 3/4
one small circles (I used my SU! owl punch)

Coloured card stock:

mini circles, blue (SU! Owl punch)
small circles, red (SU! Owl punch)

Others:

Liquid glue (I use tombo mono)
Dimensional adhesive (I use rolls of dimensional tape, see the trick below!)
Sticky strip (SU!)
A ruler can be useful too.

The assembly is quiet easy, you just have to look at the pictures above and below! However, I have some little indications:

First: The two big black pieces should be joined together on the 5 inch side, and completely overlap. As there is a bit of traction on these parts when you open the card, it is best to use a very sticky adhesive. I use sticky strip for this one.

IMG_8436Second: One of the sides will stick out of the rest when you fold the card, this is the one that needs to be cut to create the little extruding piece on the right. This piece is 2 1/2 inches on top and 3 inches on the bottom. I used a ruler and a pencil to clearly mark what I wanted to cut out before cutting. This can spare you headaches!

IMG_8435Third: A little trick for applying your dimensional adhesive (only for people using dimensional ribbon as I do. I think Artemio and Scor-Pal also sell this kind of adhesive). Here it is: I adhere my ribbon on baking paper and cut it into pieces (the size I need). This avoids the dimensional of sticking to my scissors and I can cut a whole bunch very quickly!

tutorial_2Finally: Adhering the buttons is a bit a pain in…. But using your ruler to align the buttons on one row makes it already much easier. Once the buttons are placed you can adhere the white panes inside for the writing.

Of course you can make a card without the third panel. I needed this one as a lot of people were going to write in the card, thus a lot of space was required.

As you may expect, this card does not fit into any standard sized envelope, so I made one myself. Here are the dimensions and instructions:

One 12 x 12 black paper sheet.
Score in one direction at 4 1/4, 10 and 12 inches.
Score the other direction at 7/8 inches on either side.
Cut away this small strip except in the middle pane.
Round all corner and fold your paper. The best way is to put your card inside the envelope when folding as it is quiet thick (Otherwise the envelope will be too small).

So, I am done for this evening, it is almost midnight and I am falling asleep…
Sleep tight!

Crealotte

Another peek into my technique bundle!

Hi bloggers!

It’s Monday again, so time to give you some new inspiration. I already featured this stamp set last week, but I like this one for masculine cards. I used a split negative technique, but added some twist in order to give it some more interest. How do you like it? I wrote down the instructions for the technique bundle I told you about earlier. The bundle will be divided in several chapters which you will be able to acquire separately. On every page a technique featured by a specific card. Moreover, I also give you variations on every technique so that with each of them you could create quiet different looking cards! I promise to keep you posted on the advancements of the bundle. And, please, don’t hesitate to give me additional ideas and techniques you wish to find in the bundle, this might get you a complete copy!

Have a nice day!

Desertly hot, a cowboy’s Bday

Hi Bloggers!

I know, I did not keep my promise! But here I am. Our move is officially finished, but I still need so much furniture! We had no time to go shopping, to visit Ikea or any other furniture store yet. All my scrap stuff in still in boxes in my future scraproom. Oh yes, that means that, since October, I still didn’t do any crafting! Awful! I am showing detox signs… :s .

But today, I am in the train (we are visiting family), and I have nothing to do for about 4 hours, so I will try to set up my promised round of 19 posts. We’ll see where I get. So this is my first one. I made this birthday card while thinking of my dad. He had a ranch for over 15 years and is all about horses. I wanted to get my newly (at that time) bought brayer out and try to make a degrading color background. I used black staz-on ink to ink up the bottom part of the image as this ink covers the paper more easily than classic ink. The strip of paper is made of plain very vanilla cardstock which I inked by a direct to paper technique with river rock ink and stamped the buffalo skull (difficult to see as it is mainly covered) in early espresso. I can’t remember which paper I used to cover up the base of the card, sorry. Finally I used my crop-o-dile to trim three corners of the main image and aged/thorn the last one. I hope you like it!

See you soon!

Hiking fun

Today a card I made while thinking of the next hike I would take with my friends. Last year we went to the white mountains, and I hope to do that soon again! For the background technique I used always artichoke and pumpkin pie ink. The bottom was stamped with little trees from a close to my heart set. Also the main image is close to my heart while the sentiment is stampin’up. I colored the twine with classic ink so that it would match the early espresso card stock and button. I was a bit afraid to combine these colors together, but finally, I think they fit. I will leave you with this and get back to work in our new house!

Cheers